Transducer - Accessories

Additional probe and stainless steel leader that can be purchased for use with the Scotty Seeker™ Complete System. Probe Features Include the Following: Airmar’s Gen2 Paddlewheel Reinforced probe housing with an operational depth of up...

PTI-WBL Ice Transducer with Blue ConnectorThe PTI-WBL is an 83/200 kHz blue connector ice transducer with a 7-foot cable. Features:83 kHz With 52° Beam Width200 kHz With 22° Beam WidthUp to 1000-Foot (300-Meter) Range at 83 kHz1 Internal Broadband...

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached to the...

Lowrance 9pin 10ft Transducer Extension CableModel: 000-00099-00610ft (3m) extension cable for 9pin transducers.*For optimum performance do not use more than 1 extension per installation.

Lowrance Scout Wide Bracket for ActivveTarget2Model: 000-15960-001The ActiveTarget® 2 Scout™ wide bracket is a non-adjustable bracket arm that holds two ActiveTarget® 2 transducers at proper Scout™ angles. When installed with two ActiveTarget® 2 sonar...

The plastic transom mount bracket allows the StructureScan 3D and TotalScan transducers to be mounting directly to the transom, on the jackplate or under the step.

Lowrance 7-pin to 9-pin adapter Model: 000-13313-001 Connects 7 pin transducers to the new 9 pin connector on the display.

Lowrance 3m, 10ft, extension cable Model: 000-12752-001 3m, 10ft, extension cable for use with StructureScan 3D transducers.