Cannon Quick Kits

Quantity of 6 Snap and Insulators Replaces Part Numbers 2250148

Product DescriptionBrings the weight right to you so you can avoid leaning out or swinging the boom in to rerig. Fits all downriggers with booms up to 8' length. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Will fit both the old & new Low Profile Swivel Base. Will not fit high profile swivel base or pedestal mounts Assembly Contains;1 - 2249001 Knob1 - 3392600 Pin1 - 2277001 Nut1 - 2287002 Spring

3 Position Switch Position 1 (Up) - On - Locks In Place Position 2 - Center - Off - Locks In Place Position 3 (Down) - On - Momentary On-Off-(On) Back Has 4 Wire Terminals - Will not work with 3 wire Downriggers The Cannon 4 Prong Switch has...

Kit Contains; 4 - 9280713 (1/4" x 20 x 1 1/2" Truss Head Screw)4 - 9280720 (1/4" x 20 x 2" Truss Head Screw)4 - 9280725 (1/4" x 20 x 2 1/2" Truss Head Screw)4 - 2371712 (9/32" Flat Washer)4 - 2263103 (1/4" x 20 Nylock Nut) All Hardware Is Stainless...

If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains;2 - 9010001 Nyliner / Bearing Reel1 - 3391992A...

 If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains;2 - 3391737 Thrust Washer1 - 9010280...

If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains;1 - 3391995 Ratchet Plate1 - 3391990 Brake...

If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains;2 - 9010001 Nyliner / Bearing Reel2 - 9430210...

METRIC KIT If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains 1 - 3320011 Metric 3 Digit...

If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains 1 - 0220477 3 Digit Counter1 - 0833561 Counter...

If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains 1 - 0220477 3 Digit Counter1 - 3392222 Reel...

If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains 1 - 0220477 3 Digit Counter1 - 0233560 Reel...

If your model is not listed below, please see our other listings or give us a call at 800 FISH-307 (800 347-4307) & ask to speak to our Factory Certified Warranty & Service Technician. Kit Contains1 - 0220477 3 Digit Counter1 - 3333004 Reel...

Cannon Downrigger TELESCOPIC BOOM REPAIR / REBUILD KIT WITH SWIVELHEAD ASSEMBLY Kit Contains 1 of each 3770200 - Swivel Head Assembly (Replaces 3990200) 3393300 - Large Collet 3393301 - Intermediate Collet 2219822 - Large Collet Clamp 2219823 -...

Cannon Downrigger TELESCOPIC BOOM REPAIR / REBUILD KIT Kit Contains 1 of each 3393300 - Large Collet 3393301 - Intermediate Collet 2219822 - Large Collet Clamp 2219823 - Intermediate Collet Clamp

Cannon Downrigger 30 AMP CIRCUIT BREAKER & DUST BOOT Please Make Sure Your Downrigger Uses A 30 Amp Circuit BreakerIf You Need A 10 Amp Please Search For 1212386. All of our Cannon parts are direct factory replacements unless otherwise noted...

Cannon Downrigger 3 PRONG SHORTSTOP SWITCH & DUSTBOOT 3 Position Switch Position 1 (Up) - On - Momentary - Returns To Center Position When Released Position 2 (Center) - Off - Locks In Place Position 3 (Down) - On - Momentary - Returns To...

Replaces part numbers 2998910 & 3991903 Kit Contains 1 - 0290796 Rod Holder Tube1 - 2151726 Washer1 - 2383106 5/16" SS Nut1 - 9040310 5/16" Bolt1 - 9430160 5/16" Star Washer1 - 3319005 Rod Holder Clamp1 - 3325002 Rod Holder Disk1 - 2277002...

The Cannon Rear Mount Rod Holder is a Downrigger Mounted Rod Holder and Features Dual Axis Adjustability. Features Dual Axis Adjustability Works as Replacement or Second Rodholder Easy to Use For The Following Cannon Downriggers DigiTroll 10...

Cannon Downrigger 25 AMP CIRCUIT BREAKER  Please Make Sure Your Downrigger Uses A 25 Amp Circuit BreakerIf You Need A 10 Amp Please Search For 1212386. All of our Cannon parts are direct factory replacements unless otherwise noted. Circuit...

The Cannon Flush Mount power port allows for quick thru-hull connection to a Cannon Downrigger Power cable. It quickly connects to the yellow female battery end plug from your downrigger, with no need to cut or splice wires. The watertight cover and...

Lexan standard mounting base. Measures approximately 1-3/4" Tall. Note** This is the mounting base only. Does not include mounting hardware (bolts, nuts, washers.) To order a base with mounting hardware please click here. Standard equipment on: 2007...

3 Position Switch Position 1 (Up) - On - Momentary - Returns To Center Position When Released Position 2 (Center) - Off - Locks In Place Position 3 (Down) - On - Momentary - Returns To Center Position When Released Back Has 3 Wire Terminals -...

The Cannon Front Mount Dual Rod Holder comes with two aluminum tube clamps and a dual mounting bracket. This rod holder has two independently adjustable rod holders that are made with gimbal and drain hole. It fits all 1-5/16" Cannon booms - Including...

3 Position Switch Position 1 (Up) - On - Locks In Place Position 2 - Center - Off - Locks In Place Position 3 (Down) - On - Momentary On-Off-(On) Back Has 4 Wire Terminals - Will not work with 3 wire Downriggers The Cannon 4 Prong Switch has...

Brings the weight right to you so you can avoid leaning out or swinging the boom in to rerig. Fits all downriggers with booms up to 8' length.