Minn Kota Quick Kits

Compatible with Minn Kota MKP-2,MKP-3,MKP-6,MKP-7,MKP-25,MKP-37 Size:Diameter of the prop drive pin: 1/8"Length of the prop drive pin: 1.06" FitsCamo 55Edge 45, 55, 70Endura Classic 40, 55Endura 30, 34, 38, 40, 45, 50, 55Endura Max 40, 44, 45, 50,...

Fits all fresh water and salt water transom mount motors and bow mount hand control motors. Shaft diameter of 1 1/8" only! This easy to use Minn Kota trolling motor lock lets you change depths quickly, simply and securely.When you find your...

Models That Use This Kit Please Note; If your motor is not listed, please call (800) 347-4307 & speak to our Minn Kota factory trained technician. This is a generic kit. Not all parts will be used with every motor. 31 55/SC 90T...

Minn Kota Trolling Motor Endura T-Bar Kit Kit Contains; 1 - 2060515 - Tilt Lever Pin1 - 2062706 - T-Bar Spring 1 - 2063605 - **Plastic T-Bar 1 - 2067201 - *Black Tilt Lever  The T-Bar kit is for the Newer Endura style plastic transom...

Models That Use This Kit Please Note; If your motor is not listed, please call (800) 347-4307 & speak to our Minn Kota factory trained technician. This is a generic kit. Not all parts will be used with every motor. 35A 35T 35TA...

Fits Minn Kota trolling motor models that have a 3-5/8" Outside Diameter Lower Unit.Please measure the outide diameter of your lower unit to ensure this seal kit will fit your motor. Typically fits Minn Kota motors with 46 - 70 pounds of thrust All...

 Minn Kota I-pilot Remote Back & Battery Case Kit: Kit Contains;1 x 2886422 I-PILOT REMOTE COVER, BATTERY COMPARTMENT ASSEMBLY 1 x 2372556 CASE, BOTTOM I-PILOT 1.51 x 2376941 GASKET,BATTERY COMPARTMENT No Returns Or Exchanges On Any Electronic...

If you choose to install the board yourself we offer no warranty of any kind.  Substitute for Minn Kota part numbers 2304012, 2304013, 2774012  This product is non-returnable.  Fits Minn Kota Power Drive Legacy and Riptide Power Drive...

Minn Kota Trolling Motor 80lb & 101lb Riptide & Terrova Ramp / Skid Kit Kit Contains; 4 - 2325115 - Black Rubber Rest Pad4 - 2321706 - Flat Washer4 - 2323412 - Screw1 - 2323905 - Left Motor Ramp - 4"1 - 2321925 - Left Skid Plate1 - 2323900 -...

Backwards compatible for bow mount All Terrain (AT) models from 1994 - 2008 with a red directional arrow. Backwards compatible for bow mount Edge models from 2006 - 2011 with a red directional arrow. Bow mount Edge models from 2012 - Present with a...

Fits Minn Kota trolling motor models that have a 3-1/4" Outside Diameter Lower Unit.Please measure the outide diameter of your lower unit to ensure this seal kit will fit your motor. Typically fits Minn Kota motors with 28 - 45 pounds of thrust from 1991...

Minn Kota Trolling Motor Rope & Handle Kit Kit Contains; 1 - 2150400 - Pull Handle / Grip1 - 2881601 - Rope & Washer (Approx. 43.5" Rope Length) Kit will fit all All Terrain, Edge and Maxxum models that use the pull grip system. It replaces...