Rigging

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-415

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-415-1T

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-407

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-409

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-409

Open Body Jaw to Swage Turnbuckle for 3/16" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications:3/16" Wire1/4" Pin3" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-316

Splice Line Gate Kit - Midship for One SideC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line...

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications:1/8" Wire1/4" Pin3" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-314

Lever Arm Crimper ToolC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which...

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-406

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook. Manufacturer : C. Sherman Johnson Manufacturer Part No : LS-2500

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-408