NMEA Cables & Sensors

Power cable. For use with red NMEA network.

Lowrance NMEA2000 4 Way Block Model: 000-12612-001 UPC: 9420024146071 New low loss NMEA2000 4-way joiner. Connect four NMEA2000 Micro-C devices to the NMEA2000 Network.

Lowrance NMEA2000 Micro-C Backbone KitModel: 000-10760-001UPC: 9420024118382Get your NMEA2000 Micro-C network off toa good start with this kit.What's in the Box:T-Connectors x 315 foot N2K cableN2K power cableMale terminatorFemale terminator

The Maretron PT-SNUB-01 Pressure Snubber is used in combination with the Maretron FPM100 Fluid Pressure Monitor and a pressure transducer FPM100 accessory. The PT-SNUB-01 dampens pressure variations between a pressure source and the pressure transducer,...

Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge ...

Pressure Transducer Mechanical Drawing Pressure Transducer Specifications Part Number Range Accuracy Type PT-0-3PSI-01 0 to 3 PSI (0.21 bar) ± 2% Full Scale Gauge PT-0-5PSI-01 0 to 5 PSI (0.34 bar) ± 2% Full Scale Gauge ...

Field-attachable connectors allow you to make field connections to bulk cable (see diagram). The color-coded screw terminals match the individual wire colors found within the bulk cable for error-free field installation. Color-coded screw terminals make...

Use our male NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables. This connector can also be used to shorten any Garmin NMEA 2000 drop/backbone cable.

Two termination resistors are required on every NMEA 2000 network, one on each end of the trunk line. Normally, a male termination is used since male pins tend to point back to the power source. In cases where the gender is reversed, a female terminator...