Minn Kota Accessories

Heavy Duty Composite Quick Release Bracket - Saltwater Features: Designed to meet 112 lbs & 72” shaft motors Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck Low-profile deck-mounted puck...

i-pilot Link Holding CradleSecure i-Pilot Link to your belt or console with this versatile cradle. Use the belt clip for constant easyaccess, or remove the belt clip and mount i-Pilot Link to your dash for simple, straightforward operation. WARNING:...

Easily remove your bow-mount motor with these high-yield composite brackets. They're ultra-strong, corrosion-resistant and feature a low-profile design that leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can...

MKA-16-03 Quick Release BracketFor quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system.Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2,...

MKR-US2-14 Universal Sonar 2 Adapter Cable - Garmin 8-PinUniversal Sonar 2 delivers advanced water temperature sensing for the best view of the waters below. Adapter connects your Garmin fishfinder with a Universal Sonar 2 transducer on your trolling...

MKR-US2-9 Lowrance / Eagle Adapter CableModel:#1852069Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. These adapters connect your trolling motor to your favorite brand of...

Wireless CoPilot™ for PowerDrive V2Wireless control featuring plug-n-play design for easy hookup. Key-FOB style remote controls left/right steering, speed up/down, and motor on/off from your fishing rod, wrist or belt. Receiver attaches to the right side...

Corded Foot Pedal - Ulterra/Riptide UlterraDual mode operation controls AutoStow/Deploy and Power Trim as well as steering, speed, prop on/off, Spot-Lock and AutoPilot. Includes 18' cord wiht waterproof connector. Compatible with Ulterra and Riptide...

This heavy-duty trolling motor connector uses a snap-lock design for 6- to 12-gauge wire. The kit includes two plug halves, four contacts and four solder plugs for securing wire leads into contacts (wire not included). WARNING: This product can expose...

Weedless Wedge™ Props (MKP-7)The only 100% fully weedless prop. Design pushes weeds away to conserve battery power. Easily moves through heavy vegetation or cover, even at slow speeds. Motor Diameter:   3 - 5 / 8"Prop Nut Kit:        "A" ...

MKR-MDI-2 Humminbird HELIX MDI Sonar Adapter Cable for HELIX 5 & 7 Connects your Humminbird HELIX fishfinder to a Minn Kota motor with built-in MEGA Down Imaging. Shielded cable for crystal-clear MEGA Down Imaging sonar performance. Compatible...

MKR-MDI-1 Humminbird HELIX MDI Sonar Adapter Cable Connects your Humminbird HELIX fishfinder to a Minn Kota motor with built-in MEGA Down Imaging.Shielded cable for crystal-clear MEGA Down Imaging sonar performance.Compatible Units:HELIX 8 G3NHELIX 9...

MKA-51 Quick Release BracketThe bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware...

Heavy Duty Composite Quick Release Bracket - FreshwaterFeatures:Designed to meet 112 lbs & 72” shaft motorsAllows bow-mount trolling motors to be quickly mounted and/or removed from boat deckLow-profile deck-mounted puck designConstructed of marine grade...

Heading Sensor for BlueTooth i-PilotThis Bluetooth-enabled heading sensor contains a compass that detects your boat's heading and communicates it to your trolling motor to enable the Spot-Lock Jog feature, which lets you move your Spot-Lock 5' increments...

Powerdrive/Riptide PowerdriveWith an 18' cable and waterproof connector plug, this pedal delivers side-to-side steering control, and includes a momentary/constant ON switch and a speed control knob for precise adjustments. Plug-n-play with PowerDrive V2,...

Talon Side Shim Kit - BMSThe Talon BMS (Bob's Machine Shop) Side Shim Kit fills the recess gap on side of BMS jack plate; for jack plate mounting - port or starboard side. Product : MINN KOTA TALON BMS SIDE SHIM KIT Manufacturer : Minn Kota Manufacturer...

MKA-42 Quick Release BracketFor quick, easy removal of your Fortrex or Maxxum bow-mount trolling motor. Extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system. Ultra-tight tolerances eliminate...

MKR-US2-13 Universal Sonar 2 Adapter Cable Connects Humminbird ONIX FishfinderUniversal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. Adapter connects your Humminbird ONIX...

Minn Kota Talon 10' Red Shallow Water Anchor Bluetooth with Light Model: 1810440 Built-in Work Light lets you tie lines and work from the transom any timeof day. Slectable Blue or White with three intensity levels Bluetooth to allow control from...