Installation Accesories

Weld Mount AT-3 Black Nylon Wire Tie Mount 50 PackModel: 803950BThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull...

Blue Sea Systems Dual PowerPost - Two 3/8""-16 StudsModel: 2017-BSSDesigned for connecting high amp conductorsIncludes one black and one red insulatorProvides a termination point for extending the length of outboard harnesses or other...

Blue Sea Systems PowerPost - 5/16"" - 18 StudModel: 2002-BSSConnects high amperage cables securelyStud dimensions: 5/16"" x 7/8""Base Material is PBT UL94 V0Insulated single stainless steel stud terminates multiple large...

Weld Mount Stainless Studs (#8-32 thread) 1.25"" tall 15 PackModel: 83220These small panel studs have a wide range of uses. Originally they were used for mounting on The backside of dash panels or for mounting to the console. Now they are used for...

Weld Mount AT-850 Mixing Tip for AT-2010 and AT-8040 10 PackModel: 80850The At-850 tip is for use with AT-2010 and AT-8040. It’s unique design eliminates any possibility of the cartridge plugging up as the entry is separated.What's in the Box:10 AT-850...

Weld Mount AT-650 3.5"" Adhesive Mixing Tip for AT-6030 and AT-4020 10 PackModel: 80650The 3.25" AT-650 mixing tip is for use with AT-6030 and AT-4020. The 3.25 inch significantly reduces waste over the traditional 6 inch tip. Each package contains 10...

Weld Mount AT-5 Black Nylon Wire Tie Mount 30 PackModel: 805BThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs...

Well Mount AT-5 Black Nylon Wire Tie Mount 50 PackModel: 805950BThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150...

Weld Mount AT-5 White Nylon Wire Tie Mount 50 PackModel: 805950The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150...

Weld Mount AT-5 White Nylon Wire Tie Mount 30 PackModel: 805The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs...

Weld Mount AT-3 Black Nylon Wire Tie Mount 30 PackModel: 803BThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull...

Weld Mount AT-3 White Nylon Wire Tie Mount 50 PackModel: 803950The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20"". Average pull...