Description
We will not accept any returns for this part. All sales of this item are final.
Replaces part numbers 050175, 050190
No Returns Or Exchanges On Any Electronic Parts, Boards, Or Switches. NO EXCEPTIONS
No Returns Or Exchanges On Any Electronic Parts, Boards, Or Switches. NO EXCEPTIONS
Customer Reviews
-
Alternate part
Okay, like you I'm bummed that this part is labelled "obsolete" by Cannon. It's not obsolete for those of us with Cannon Mag 10HS. So I purchased 3394006 from Fish307 and wired it per instructions for Mag10STX. The only modification was that I had to snip off the connector provided on the green wire and put onto it instead a 1/4" male spade connector (from hardware store). The PCB is slightly bulkier, and so it took perhaps 5 minutes of fiddling to get it to physically fit into the small space, but it does. And works like a charm. And the relay switch is rated at a higher amperage. Important: Follow the wiring diagram for Cannon Mag 10STX and you'll be fine. DO NOT instead try to match up PCB labels like "J1" "J2" etc. The resistor for the motor output on 3394006 is different than for 3394002. But the motor on the Cannon Mag 10HS is bullet proof.
-
Cannon downrigger control board
It snapped right In. Fished the next day.
-
fits perfect
works perfect
-
DOWNRIGGER PART
WORKS PERFECT. THANKS FOR THE QUICK TURN AROUND.
-
control board
worked perfect
-
CONTROL BOARD
I hooked it up and it seems to be working fine
-
Thanks!
The circuit board shipped fast and worked great upon installation
-
easy to install
was easy to install and got downrigger working again
