Battery Management

Remote Emergency Parallel SwitchThe Remote Emergency Parallel Switch is used for convenient remote activation of the 10 minute emergency parallel function on motorized Voltage Sensitive and Emergency Paralell switches. It can be mounted standalone or...

7719 - ML-Series Solenoid Switch - Stripped Wire - 24VFor applications where sustained control signals are needed to emulate a normally open relay with a lower current draw.Features:Silver alloy contacts provide high reliability for switching live...

Remote Operated Battery Switch, 275A ContThe MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes,...

M-Series Dual Circuit Plus™, Main + 3 Positions CLB VerticalFeatures:Push Button Reset-Only Branch Circuit Breakers provide economical high-density circuit protection when switching is provided elsewhere - ideal for 24-hour circuit protectionProvides DC...

Single Circuit ON-OFF with Locking Key - Red300 Amps continuous rating for outboards and small gasoline or diesel enginesTin-plated copper studs for maximum conductivity and corrosion resistanceStuds accept 3/8" (M10) ring terminals7/8" (22 mm) stud...

Remote Battery Management Cluster f/Twin EngineOffers all features of motorized battery switches and Motorized VSRs in one kit. Makes ordering easy! Clusters are surface mount, and can be rearranged to meet specific needs, such as port and starboard...

Non-Inverting Remote On-Off CableUse this cable to connect the following products to the VE.Bus BMS:Skylla-TG all modelsBattery Protect models BP40i, BP60i, and BP200i (all discontinued).The cable translates the remote on/off driver logic from the VE.Bus...

Inverter Remote On-Off CableUse this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350, or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output: VE.Bus BMS: the Inverter will be switched off when the...

Argofet Battery Isolator 100-3 3 Batteries - 100AMPSimilarly to Argodiode battery isolators, Argofet isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries...

SmallBMS for Smart LiFePO4 Batteries with M8A simple and low-cost alternative to the VE.Bus BMS. The smallBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it...

Smart BMS 12/200 for Victron LIFEPO4 Batteries 12VDC OnlyThe Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator...

VE.Direct Non-Inverting Remote On-Off Cable Non-Inverting for BlueSolar & SmartSolar MPPTThis cable is intended for on/off control of BlueSolar or Smart Solar MPPT solar chargers with a VE.Direct interface. For example, installing MPPTs in combination...