Autopilots

Simrad SimNet cable 10m (33ft)Model: 24005852SimNet cable 10m (33ft)

Simrad SimNet cable 2m (6.6ft)Model: 24005837 SimNet cable 2m (6.6ft)

Simrad Autopilot fitting adaptor kitModel: 000-15944-001Used when replacing older pumps with MkII Pumps 1,2,3,4 and 5Used when NPT hose kits are already presentWhat's in the Box:3 x ORB-5 to ¼"" NPT adaptors

Octopus Type T Tilt ShaftBehind Dashboard DriveModel: OCTAFMDTPWRetro Fits to Most Cable Steered VesselEasily Adaptable to S1 AutopilotsThe Only Viable Option When Adding an Autopilot to a Cable Steered VesselAffordable, Reliable, Seamless-behind the...

Intellisteer TYPE R Wireless Steering System For Cable Steered Boats with Auxiliary OutboardsModel: INTTYPERDrive connects to kickerElectronic clutch disengages for manual steeringRotary drive systemSafety override technologyCurrent 1.25A typical, 5A...

Type T - Straight shaft tilt version for mounting behind the dash with a steering wheel tilt facilityThis drive unit replaces a manual Tilt drive and is mounted directly behind the dash, but still allows the angle of the steering wheel to be changed. It...

Verado Autopilot Fitting Kit for MK2 PumpsVerado steering system autopilot fitting kit for MKII Pumps 1, 2, 3, 4 & 5. Fitted with Verado O-Ring Face Seal fittings use don Verado steering systems. Fitted hose kit designed for simplified Verado Autopilot...

Octopus 38mm Bore Linear Drive12"" Stroke Remote Pump 12vDCModel: AF1212LAR12Average Current 4-6 ampsMax Current 19amps12vDCCylinder Bore: 38mmVariable Flow Rate: 600cc-1.2 litre/minStroke: 305mm/12inHardover Time(Suggested): 14-16 secMax Rudder Torque:...

Intellisteer TYPE A Wireless Steering System For Existing Drives or AutopilotModel: INTTYPEANo need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot DriveWhen the...

Integrated Rudder Feedback UnitsOC15SUK27BTypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is...

The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two -piece gear housed in an eccentric ring. This allows for...

Furuno Navpilot 300 Autopilot, requires Drive and Heading InputModel: NAVPILOT 3001-DIN 4.1"" IP56 Waterproof Color Display (2 more Control Heads can be added)Navigation Modes: Auto, Advanced Auto, Sabiki, Nav/Route Tracking, FishHunterPigtail cable...