Pro-Troll

Strike-Lite Cooler/Tackle Box light pack.  Four white adhesive lights.  Stick one of these inside your cooler or tackle box and you'll never be in the dark again!  Features waterproof 3M adhesive that will stick to any flat surface. ...

Strike-Lite Kayak/Canoe light pack.  Six adhesive lights - 2 red, 2 green, 2 white.  An easy way to light up your canoe or kayak after dark!   Features waterproof 3M adhesive that will stick to any flat surface.  Turns on by...

Strike-Lite Planer Board light pack.  Four adhesive lights - 2 red, 2 green.  Features waterproof 3M adhesive that will stick to any flat surface.  Turns on by pushing the colored button. Three light modes - push once for fast blink, twice...

Strike-Lite In-line green lights, 2 pack.  This line light can be used in a fishing line.  It is ideal for ice fishing, jigging or trolling.  Turns on by pushing the colored button. Three light modes - push once for fast blink, twice for...

Strike-Lite adhesive red lights, 4 pack.  Features waterproof 3M adhesive that will stick to any flat surface.  Turns on by pushing the colored button. Three light modes - push once for fast blink, twice for slow blink, three times for steady...

Strike-Lite adhesive green lights, 2 pack.  Features waterproof 3M adhesive that will stick to any flat surface.  Turns on by pushing the colored button. Three light modes - push once for fast blink, twice for slow blink, three times for steady...

Strike-Lite adhesive green lights, 10 pack.  Features waterproof 3M adhesive that will stick to any flat surface.  Turns on by pushing the colored button. Three light modes - push once for fast blink, twice for slow blink, three times for...

Strike-Lite adhesive green lights, 4 pack.  Features waterproof 3M adhesive that will stick to any flat surface.  Turns on by pushing the colored button. Three light modes - push once for fast blink, twice for slow blink, three times for steady...

Strike-Lite adhesive green lights, 2 pack.  Features waterproof 3M adhesive that will stick to any flat surface.  Turns on by pushing the colored button. Three light modes - push once for fast blink, twice for slow blink, three times for steady...

Small ProFlash Replacement Lights for PF4 Flashers  2 per package.  Each light lasts approximately 80 hours

Replacement lights for the ProFlash lighted flashers.  2 per package.  Each light lasts approximately 80 hours

This is the latest high-tech Pro-Troll development. You will be amazed with the flashing light results! Following three years of testing and development, Pro-Troll has developed a lighted flasher series. Most fish are attracted to light. The light is...

The ProChip 8 Flasher is an eight inch flasher with a diagonal kicker fin on the back which give the flasher a more erratic kicking action particularly at slow speeds. It can be run as slow as 1 MPH with outstanding action. It has a minimum drag when a...

The Big Fin model is generally used with bait 6 or 7 inches long. Rig your hook so that it will ride at the tail of the baitfish. The item comes three to a pack. This unrigged head can be rigged with any hook setup. Some fishermen prefer to rig with a...

The Big Fin model is generally used with bait 6 or 7 inches long. Rig your hook so that it will ride at the tail of the baitfish. The item comes three to a pack. This unrigged head can be rigged with any hook setup. Some fishermen prefer to rig with a...

The Big Fin model is generally used with bait 6 or 7 inches long. Rig your hook so that it will ride at the tail of the baitfish. The item comes three to a pack. This unrigged head can be rigged with any hook setup. Some fishermen prefer to rig with a...

The Big Fin model is generally used with bait 6 or 7 inches long. Rig your hook so that it will ride at the tail of the baitfish. The item comes three to a pack. This unrigged head can be rigged with any hook setup. Some fishermen prefer to rig with a...

The Big Fin model is generally used with bait 6 or 7 inches long. Rig your hook so that it will ride at the tail of the baitfish. The item comes three to a pack. This unrigged head can be rigged with any hook setup. Some fishermen prefer to rig with a...

The Big Fin model is generally used with bait 6 or 7 inches long. Rig your hook so that it will ride at the tail of the baitfish. The item comes three to a pack. This unrigged head can be rigged with any hook setup. Some fishermen prefer to rig with a...

The Big Fin model is generally used with bait 6 or 7 inches long. Rig your hook so that it will ride at the tail of the baitfish. The item comes three to a pack. This unrigged head can be rigged with any hook setup. Some fishermen prefer to rig with a...

This baitholder is very popular and catches a lot of salmon. It is normally the third best salmon producer in the series. The top colors other than clear are the chartreuse, the red and the green. The item comes three to a pack. This unrigged head can be...

This baitholder is very popular and catches a lot of salmon. It is normally the third best salmon producer in the series. The top colors other than clear are the chartreuse, the red and the green. The item comes three to a pack. This unrigged head can be...

This baitholder is very popular and catches a lot of salmon. It is normally the third best salmon producer in the series. The top colors other than clear are the chartreuse, the red and the green. The item comes three to a pack. This unrigged head can be...

This baitholder is very popular and catches a lot of salmon. It is normally the third best salmon producer in the series. The top colors other than clear are the chartreuse, the red and the green. The item comes three to a pack. This unrigged head can be...

This baitholder is very popular and catches a lot of salmon. It is normally the third best salmon producer in the series. The top colors other than clear are the chartreuse, the red and the green. The item comes three to a pack. This unrigged head can be...

This baitholder is very popular and catches a lot of salmon. It is normally the third best salmon producer in the series. The top colors other than clear are the chartreuse, the red and the green. The item comes three to a pack. This unrigged head can be...

This baitholder is very popular and catches a lot of salmon. It is normally the third best salmon producer in the series. The top colors other than clear are the chartreuse, the red and the green. The item comes three to a pack. This unrigged head can be...

This baitholder is very popular and catches a lot of salmon. It is normally the third best salmon producer in the series. The top colors other than clear are the chartreuse, the red and the green. The item comes three to a pack. This unrigged head can be...

Roto Chip unrigged Baitholder Size 1 small. 3 pack. Ideal for baitfish in the size range of 2" to 2 1/2". The head is 1/2" wide. The 1/4" high diagonal fin on the back gives the bait an ideal erratic rolling action. It is ideal for baitfish in the...

Roto Chip unrigged Baitholder Size 1 small. 3 pack. Ideal for baitfish in the size range of 2" to 2 1/2". The head is 1/2" wide. The 1/4" high diagonal fin on the back gives the bait an ideal erratic rolling action. It is ideal for baitfish in the...

Roto Chip unrigged Baitholder Size 1 small. 3 pack. Ideal for baitfish in the size range of 2" to 2 1/2". The head is 1/2" wide. The 1/4" high diagonal fin on the back gives the bait an ideal erratic rolling action. It is ideal for baitfish in the...

Roto Chip unrigged Baitholder Size 1 small. 3 pack. Ideal for baitfish in the size range of 2" to 2 1/2". The head is 1/2" wide. The 1/4" high diagonal fin on the back gives the bait an ideal erratic rolling action. It is ideal for baitfish in the...

The 2500 series Roto Chip bait holders are for baitfish 6 to 7 inches long. The larger bait takes the bigger fin (3/4 inch high) to get a good rolling action at trolling speed. The rear hook on this model is also extended back so that it rides at the...

The 2500 series Roto Chip bait holders are for baitfish 6 to 7 inches long. The larger bait takes the bigger fin (3/4 inch high) to get a good rolling action at trolling speed. The rear hook on this model is also extended back so that it rides at the...

The 2500 series Roto Chip bait holders are for baitfish 6 to 7 inches long. The larger bait takes the bigger fin (3/4 inch high) to get a good rolling action at trolling speed. The rear hook on this model is also extended back so that it rides at the...

The 2500 series Roto Chip bait holders are for baitfish 6 to 7 inches long. The larger bait takes the bigger fin (3/4 inch high) to get a good rolling action at trolling speed. The rear hook on this model is also extended back so that it rides at the...

The 2500 series Roto Chip bait holders are for baitfish 6 to 7 inches long. The larger bait takes the bigger fin (3/4 inch high) to get a good rolling action at trolling speed. The rear hook on this model is also extended back so that it rides at the...

The 2500 series Roto Chip bait holders are for baitfish 6 to 7 inches long. The larger bait takes the bigger fin (3/4 inch high) to get a good rolling action at trolling speed. The rear hook on this model is also extended back so that it rides at the...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

The 2300 series Roto Chip bait holders are for baitfish 4 to 5 inches long. The diagonal fin on this series is 1/2 inch high. The rear hook is set so that it rides at the tail of the baitfish. The hooks are size 5/0. It is best not to place the hooks...

Roto Chip Baitholder Size 1 small. Ideal for baitfish in the size range of 2" to 2 1/2". The head is 1/2" wide. The 1/4" high diagonal fin on the back gives the bait an ideal erratic rolling action. Rigged with 36" leader and ready to fish. Tandem hooks...

Roto Chip Baitholder Size 1 small. Ideal for baitfish in the size range of 2" to 2 1/2". The head is 1/2" wide. The 1/4" high diagonal fin on the back gives the bait an ideal erratic rolling action. Rigged with 36" leader and ready to fish. Tandem hooks...

Roto Chip Baitholder Size 1 small. Ideal for baitfish in the size range of 2" to 2 1/2". The head is 1/2" wide. The 1/4" high diagonal fin on the back gives the bait an ideal erratic rolling action. Rigged with 36" leader and ready to fish. Tandem hooks...