— You save $19.00
Seaview Add-On Uncut single Instrument Pod
ADD-ON Uncut single Instrument Pod, hardware to install on pod box
- Width: 5.038"
- Height: 5.163"
- Depth: 3.125"
Max Usable Face:
- Width: 4.625"
- Height: 4.625"
Max Cut Out Area:
- Width: 4.125"
- Height: 4.125"
This Seaview accessory pod (SP1BOX) can be mounted to Seaview SPOD (sailboat pods) or DPOD (deck pods). These accessory pods gives you the flexibility to mount additional instruments.
Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod.
Depending on the size of your SPOD or DPOD one to four accessory pods can be mounted.
- Cut/Uncut: Uncut
- Usable Face: 4.63' x 4.63'
- Box Dimensions: 5"H x 8"W x 8"L WT: 1.3 lbs
- UPC: 839662006644
Seaview SPOD Sail Pod BoxUncut Single Instrument Pod, 1ea S.S. clampOverall Dimensions:Width: 5.038"Height: 5.163"Depth: 3.125"Max Usable Face:Width: 4.625"Height: 4.625"Max Cut Out Area:Width: 4...
Seaview SPOD Sail Pod BoxUncut SPOD Sail Pod for 3 Instruments with 2ea S.S. clampsOverall Dimensions:Width: 15.25"Height: 5.5"Depth: 3.185"Max Usable Face:Width: 14.75"Height: 5"Max Cut Out...
Seaview DPOD Deck Power Pod BoxUncut THREE instrument Pod, quick lock and release rotating baseOverall Dimensions:Width: 15.25"Height: 5.5"Depth: 3.185"Max Usable Face:Width: 14.75"Height: 5"Max Cut...
SP3S1 - Uncut Rail PodMax Useable Face: (13.75" x 9")Max Cut Out Area: (12.938" x 8.125")The SPOD is a pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has...
SP5S1 - Uncut Rail PodMax Useable Face: (14.75" x 5")Max Cut Out Area: (13.875" x 4.125")A Seaview instrument pod for sailboats. This pod has a useable face of 14.75" x 5", and maximum cut out area...
Customers Also Viewed
Adapter Plate for Simrad HALO™ Open Array Radar Use for Modular Mounts - ADA-R1 RequiredThe Seaview Top Plates are made from a pre-drilled plate that has been incased in a UV resistant ABS...
8' Pole KitTransom Mounted Modular Radar Pole MountA 8' tall pole kit for radars and satdomes. Fits a 3" diameter mast. Comes complete with a fixed top plate, adjustable base, a 48" strut kit and...
AMA-16Low profile Satdome adapters are designed with a small mounting base for installation in space limited areas. Adequate room is available in the adapter for plug & wiring. Compatible...
8' Pole KitTransom Mounted Modular Radar Pole MountA 8' tall pole kit for radars and satdomes. Fits 3" diameter masts. Features a fixed top plate, adjustable base, pole & two 48" strut kits...
Satellite Arch AdaptersComposite adapters pre-drilled to fit the complete range of Satcom/ TV Antennas. Small mounting base for easy installation in limited areas. Adjustable wedge (AMA-W)...
8' Pole KitTransom Mounted Modular Radar Pole MountA 8' tall pole kit for radars and satdomes. Fits a 3" diameter mast. Comes complete with a fixed top plate, adjustable base and one rail stand-off...
PM-W6-7This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck...
AMA-WDesigned to compensate for any slope variation.Adjustable wedge or 0 to 12 degrees for all low profile satdome adapters, AM-M3, AM-M5 & PM5-FN-8. (Does Not Fit AMA-10) Specifications:Box...
PM5-FMT-8The Seaview Thermal Camera Mount is a 5" vertical mount for FLIR M-Series or Raymarine T-Series. By raising the camera up off the mounting surface you get increased visibility. Cameras...
SP1-MODThis is a complete tapered Spreader Kit for Radar or Satdome applications with no additional accessories required. This fits Seaview modular parts ending in M1 only.