K-Drill 6 Inch Ice Auger IDRL06
The K-Drill Ice Auger System is designed specifically for modern high powered, brush-less hand-held cordless electric drills. It drills ice holes very fast and makes for a very lightweight and convenient ice auger system.
K-Drill comes in both 6” and 8” hole sizes.
The K-Drill Ice Auger System is designed specifically for modern high powered, brush-less hand-held cordless electric drills. It drills fast and makes for a very lightweight ice auger system. And the super-efficient chipper blade design ensures you’ll be able to drill easier and with more confidence than ever.
K-Drill uses a unique three-blade high carbon steel chipper design which chews through both fresh ice and old frozen holes. The K-Drill is the Lightest and Easiest Ice Auger System Ever Developed and the ONLY Auger System Specifically Designed for Cordless Electric Drills!
The sturdy aluminum constructed Auger Shaft with thermal wrap helps keep hands warm. Extensions are available too. K-Drill requires a 1/2” drill. The auger is adaptable for attachment to certain gas auger heads.
There is a quick and easy Safety Cover for the three-blade system to prevent both serious injury and keep your blades sharp. The Foam Float ensures the ice auger does not sink if it falls out of the drill chuck.
K-Drill Comes in Both 6” and 8” models and uses a durable modular plastic fighting designed to clear ice shards quickly and keep them near the hole.
- Weight: 5 Lbs
- Length: 38”
- Flute Length: 24“
- Stem Diameter: 1/2”
- Cutting Diameter: 7.5” (8”) / 6.0”
- Float Length: 7“
- Float Diameter: 3.12”
- Shaft Diameter: 1.2”
- Made in the USA
How To Install the K-Drill Auger Extension
The standard K-Drill can auger through up to 36” of ice. So when things get a bit more challenging than that, an extension can be added for ice conditions beyond three feet. The extensions can also be “stacked” if needed to create a very long ice auger.
- Slide the K-Drill’s float down, exposing the Allen bolt.
- Remove the bolt and remove the drive stem and washer.
- Install the stem of extension.
- Replace and tighten the bolt removed in step #2.
- Install the drive stem with washer into the top of extension.
- Secure it with the new bolt provided.
You will notice that the extension also has a float attached. This is to account for the added weight. Do not remove this second float.