C.E. Smith 60" Post Guide-On w/I-Beam Mounting Kit & Camo Wet Lands Post Guide-On Pads

60" Post Guide-On with I-Beam Mounting Kit & Camo Wet Lands Post Guide-On Pads

The kit includes two 60" Post Guide-On With I-Beam Mounting Kits and two Camo Wet Lands Post Guide-On Pads. These Post Guide-Ons allow you to see the location of your trailer when it's underwater. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and virtually any width I-beam trailer frame. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter). 

Features:

• Mounting hardware included
• Adjusts out to 19" on each side
• 1-1/2" square. 16 gauge pre-galvanized steel uprights
• 2-3/8" diameter white PVC posts
• Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized 
• The galvanized coating is very thin (0.45 oz. on each side)
• The cover-pads are made from strong polyurethane-coated 600D nylon fabric
• Covers have nylon closures on each end
• Open the bottom and top of the cover-pads to allow LED guide on lamps
• Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
• Color of post-guide-on covers: Camo Wet Lands

Kit Includes:

• Part 27648: C.E. Smith 60" Post Guide-On With I-Beam Mounting Kit 
• Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands 

Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width

*Sold in pairs