Autopilot - Accessories

Hand-held remote control with 7m cable and mounting bracket.  provides NFU steering in STBY and Dodge modes.  Course changing in Auto mode.

SimNet Starter Kit-1, parts included are a 24005845 SimNet 16 ft (5 m) cable, 24006298 SimNet 7-Prong Multi-Joiner, 24005894 SimNet Termination Plug and a 24005902 SimNet 7 ft (2 m) power cable with terminator.

The RF300 is a medium duty rudder feedback unit which connects directly to the Autopilot Pilot Computer using 2 wire frequency interface. Simrad rudder feedback units are high resolution units which contribute to gentle yet accurate steering that...

Simrad LFI3000 Mk2Model: 20188082The LFI3000MK2 is required for use on an outboard application with LF3000 above.

Simrad LF3000 Linear feedback unitModel: 20188074LF3000 Linear Feedback: For use with outboard system if a rudder angle is desired. Also requires LFI3000MK2 priced/ordered separately below.

Simrad SimNet 3 Prong Multi-joinerModel: 24005860SimNet 3 Prong Multi-joiner

Simrad SimNet cable 10m (33ft)Model: 24005852SimNet cable 10m (33ft)

Simrad SimNet cable 2m (6.6ft)Model: 24005837 SimNet cable 2m (6.6ft)

SimNet to Micro-C male. Adapter cable 0.5 m for SimNet products in a NMEA2000 network.

The RF45X is a medium duty rudder feedback unit. Mechanically it is identical to it's predecessor RF45, therefore it is a repairable rather than a potted throw away item. Electrically it outputs a frequency (pulse width modulated) signal that matches...

Simrad NAC-3 VRF High-current Core Pack Model: 000-13338-001 UPC: 9420024155660 NAC-3 VRF Core Pack: Comprising of the high-current NAC-3 autopilot computer and Precision-9 compass. The NAC-3 Autopilot Computer is the brains behind your autopilot...

Simrad NAC-2 VRF Low-current Core Pack Model: 000-13337-001 UPC: 9420024155653 NAC-2 VRF Core Pack: Comprising of the high-current NAC-3 autopilot computer andPrecision-9 compass. The NAC-2 Autopilot Computer is the brains behind your autopilot...

Simrad NAC-3 High-current Core Pack Model: 000-13336-001 UPC: 9420024155646 NAC-3 Autopilot Core Pack: Comprising of the high-current NAC-3 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit. The NAC-3 Autopilot Computer is the...

Simrad NAC-2 Low-current Core Pack Model: 000-13335-001 UPC: 9420024155639 NAC-2 Autopilot Core Pack: Comprising of the high-current NAC-2 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit Ideal for smaller vessels, designed to...

Simrad NAC-3 High Current Autopilot Computer Model: 000-13250-001 UPC: 9420024154397 B&G Reflex Sailing algorithms 12/24V input 30A continuous output (50A peak) 3A Clutch output NMEA 0183 Interface (1 input, 1 output) Solenoid output capable ...

Simrad NAC-2 Low Current Autopilot Computer Model: 000-13249-001 UPC: 9420024154380 Recommended for boats up to 10 metres (33 feet) in length Plug & Play installation Compatible with low-current drive pumps, mechanical drives, hydraulic linear...

Simrad RF25N Rudder Feedback Unit NMEA2000 Output Model: 000-10756-001 UPC: 9420024118306 +/- 120 Degree Measurement Precise and Accurate; +/- 0.5 Deg 5.5m attached micro-C Cable Micro-C Connectivity The RF25 is a medium duty rudder feedback...

SIMKIT-3. Micro-C to SimNet. Parts Included: - SimNet / Micro-C starter kit, - 24006298 SimNet multi-Joiner, - 24005894 SimNet Terminator, - 24006199 SimNet to Micro-C, - 24005837 SimNet Cable- 2m, - 032-0049-08 cable Power SimNet with Terminator

Simrad AC80S Autopilot Computer Model: 000-10188-001 UPC: 9420024108178 Built in CAN-bus supply 4 channel IEC 61162-1 (NMEA 0183) RX/TX. Drive computer for on/off or proportional control of rudder or thruster using galvanic isolated solenoids or high...

Drive computer for rudder using reversible motor or non-isolated solenoids and frequency rudder angle feedback. Connection for NFU remote control and one channel IEC 61162-1 (NMEA 0183) RX/TX or IEC 61162-1,2 and 3 compatible.

Garmin Gold Throttle Actuator Mercury 9Model: 120-7056-01Garmin's Throttle Actuator for TR-1Mercury 9

Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 15 m to your cable.

Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 5 m to your cable.

Pair this sensor with the GHP 12™ or GHP20 SmartPump system to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating. The GRF 10 uses a magnetic sensor to relay position information, eliminating friction that...

Garmin Solenoid Power Cable Model: 010-11533-10 UPC: 753759128869 This power cable integrates protection diodes and self-healing fuses to protect your ECU from hazardous voltages generated by hydraulic solenoid coils when used in a solenoid...

Garmin Actuator Power Cable Model: 010-11533-00 UPC: 753759968021

Install the Verado adapter kit to use the GHP™ 20 autopilot system with Mercury Verado engines. Includes installation instructions.

15 meter extension cable for GHP20 CCU.

5 meter extension cable for GHP20 CCU.

Our 5 meter extension cable for your GHP10™ is the perfect accessory for mounting the CCU further than 3 meters from the ECU.

The GHP™ 10's patented Shadow Drive technology gives boaters the security of knowing they maintain control even when relying upon the autopilot. Use this Shadow Drive attachment to automatically disengage the autopilot if the helm is turned, allowing the...

Garmin Reactor 40 Course Computer UnitModel: 010-11052-67Garmins CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to the NMEA 2000 network to communicate with...

Garmin Reactor 40 Steer-by-wire Course Computer UnitModel: 010-11052-65Garmins CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to your boat's steering system...